Do friends know the tool trimming machine in normal life? The trimming machine is mostly used for wood chamfering, metal trimming or strip edging and other motor-type movable edge trimming equipment, which is usually called a chamfering machine. The trimming machine is generally composed of a motor, a cutter head and an angle-adjustable protective cover. Trimming machine blade is the most important part of the trimming machine. Let's take a look at the tool of the trimming machine through some pictures of the trimming machine blade.
Â
Trimming machine cutter head pictures
Â
　　 Specification of trimming machine
Â
Common trimming machines have the following specifications:
Rated voltage (V) 220
Rated frequency (Hz) 50
Rated input power (w) 350
No-load speed (r / min) 30000
Milling cutter maximum diameter (mm) φ6
Rated voltage (V) 220
Rated frequency (Hz) 50
Rated input power (W) 350
No-load speed (r / min) 30000
Maximum diameter of milling cutter (mm) Φ6.35
Net weight (Kg) 1.5
Chuck diameter φ6mm (1/4 ")
Voltage 220V
Frequency 50Hz
Input power 400W
No-load speed 30000r / min
Weight 1.7kg
Â
　 Use of trimming machine
Â
The edge trimming machine is mainly to solve the previous operation method mainly relying on manual edge demolition, which has high efficiency, can greatly reduce the edge demolition workers, and greatly reduce the cost; it has greater product processing adaptability than automatic edge demolition equipment such as frozen edge demolition. There is a very large cost advantage. Plane the edge of the board into various patterns of lace. The method is to adjust the distance of the ruler and push it along the edge of the board. The shape of the knife is what the planed shape is. The edge trimming machine can trim the edge of the wooden board into a corresponding shape according to the shape of the cutter head, which is usually used to trim the right angle to the rounded round edge, and also used for the proper polishing operation of the wood. It is also widely used in the reinforcement of building beams, plates, columns, walls, etc., decoration, wall installation, brackets, railings, billboards, air-conditioning outdoor units, guide rails, satellite receiver elevators, steel structure workshops and other installations.
Attention should be paid to the use of the trimming machine: before use, check whether all parts are normal and pay attention to daily rest. When using it, it should be correctly grasped by the hand and moved uniformly along the processed part, and the speed should not be too fast. The operation should be carried out according to the previous edge to avoid damage to the objects. After use, the power supply should be cut off to remove dust.
Regarding the use and maintenance of the trimming machine, you can continue to explore in practice, you can also refer to the product manual, or consult a professional.
The above is the introduction to the pictures of the trimming machine blades, the specifications and uses of the trimming machine. The appearance of the trimming machine is a perfection of industry and handicraft industry, so that people can make more perfect things. I hope that through the introduction of the content of the edge trimmer, everyone will be more familiar with this tool.
Kn95 5 Layers Mask,Kn95 Filters Face Mask,Kn95 5 Layers Cup Facemask,Kn95 5 Layers Fold Flat Facemask
Jiangmen anjian biotechnology co. LTD , https://www.anjianmask.com