The best keel is dried larch
After the big wooden plate is bought, it will be sawn and dried.
Woodworker enters the field first to play the house horizontal line
When the color panel comes in, you will need to buy a paint brush again to prevent it from being contaminated.
Ceiling fan cannot be mounted on ceiling keel
The color panel must be pre-selected during construction
The ceiling of the suspended ceiling shall not be greater than 300 from the wall
Gypsum board should be fixed with countersunk head tapping screws, enter the board surface 1~2MM, and do rust treatment, can not use gun nails
The distance between plasterboard nails must not be greater than 200
Gypsum board has 3MM seams with wall for crack prevention
Gypsum board is best done at the sun corner protection
Up and down the wooden door to paint
The bottom of the bathroom door cover should be brushed waterproof
The size of the door should be the same
Try not to let carpentry do furniture and do it badly.
Cabinets try to buy the whole, carpentry is not good, the design is not OK
Each medium size must be considered well, and it will be troublesome to change it.
Don't do dark tracks with your own sliding doors, and no way to repair them later
If the bathroom is small, try to do the sliding door, do not open the door, take up the place
Uncertain woodworking must communicate more with the foreman. Do not let them make their own claim.
Money is the hard truth in your hand
There are children at home and less glass
Must allow workers to read the drawings
Kitchen drawer useful
Floor wood keel flatness is 5MM
The wool floor should be laid at 30 degrees or 45 degrees, leaving between 2 and 3 mm between the board and the board. The stitches must be staggered.
8~10MM seams between floor and wall
Considering expansion joints when laminate flooring length exceeds 8M
Minimize the use of MDF for door covers
Hinges and hardware must be used well
Yuba should be mounted on wooden keels and cannot be directly attached to ceilings
Decoration Carpentry Knowledge Nature Flooring Flooring Paint Glass Doors Furniture Glass Doors Drawers Cabinets Doors Kitchen Cabinets Doors Glass Furniture Doors Glass Doors Kitchen Glass Sliding Doors Bathroom Doors Bathroom Doors Bathroom Size Bathroom WC Ceiling Monolithic Bathroom Toilet Design Toilet Waterproof Toilet Moving door
CAP Type welded/seamless
Standard: ASME/ANSI B16.9 ANSI/ASME B16.11 ANSI/ASME B16.28
BSEN10253-2 BS EN10253-4
Size:1/2''~42''(Seamless); 48''~80''(Welded)
Wall thickness: Sch5~Sch160\XXS
Manufacturing process: PRESSED etc.
Material:
Carbon steel:
FSGP PG370W PT370
.ASTM / ASME A234: WPB - WPC - WP1WP11 - WP12 - WP5 - WP22 - - WP91
ASTM / ASME A/SA 420: WPL6 - WPL3EN 10216-2: P195GH - P235GH - P265GH-P355Nh
20MnNb6 - 16Mo3 - 8MoB5-4 - 14MoV6310CrMo5-5 - 13CrMo4-5 - 10CrMo9-10-15NiCuMoNb5-6-4 - X11CrMo5X11CrMo9-1 - X10CrMoVNb9-1X10CrWMoVNb9-2 - X20CrMoV11-1former BS-DIN-AFNOR equivalent grades)
HIGH YIELD STEEL FOR PIPELINE AND OFFSHORE FITTINGS
ASTM A860 / MSS-SP75: WPHY 42WPHY 46 - WPHY 52 - WPHY 60-WPHY 65 - WPHY 70 grades
WPHY 80 only as per MSS-SP75 EN 10208-2: L245NB - L290NBL360NB - L415NB - L360QBL415QB - L450QB - L485QB - L555Q
Stainless steel:
304/SUS304/UNS S30400/1.4301
304L/UNS S30403/1.4306;
304H/UNS S30409/1.4948;
309S/UNS S30908/1.4833
309H/UNS S30909;
310S/UNS S31008/1.4845;
310H/UNS S31009;
316/UNS S31600/1.4401;
316Ti/UNS S31635/1.4571;
316H/UNS S31609/1.4436;
316L/UNS S31603/1.4404;
316LN/UNS S31653;
317/UNS S31700;
317L/UNS S31703/1.4438;
321/UNS S32100/1.4541;
321H/UNS S32109;
347/UNS S34700/1.4550;
347H/UNS S34709/1.4912;
348/UNS S34800;
Alloy steel:
ASTM A234 WP5/WP9/WP11/WP12/WP22/WP91;
ASTM A860 WPHY42/WPHY52/WPHY60/WPHY65;
ASTM A420 WPL3/WPL6/WPL9;
Duplex steel
ASTM A182 F51/S31803/1.4462;
ASTM A182 F53/S2507/S32750/1.4401;
ASTM A182 F55/S32760/1.4501/Zeron 100;
2205/F60/S32205;
ASTM A182 F44/S31254/254SMO/1.4547;
17-4PH/S17400/1.4542/SUS630/AISI630;
F904L/NO8904/1.4539;
725LN/310MoLN/S31050/1.4466
253MA/S30815/1.4835;
Nickel alloy steel:
Alloy 200/Nickel 200/NO2200/2.4066/ASTM B366 WPN;
Alloy 201/Nickel 201/NO2201/2.4068/ASTM B366 WPNL;
Alloy 400/Monel 400/NO4400/NS111/2.4360/ASTM B366 WPNC;
Alloy K-500/Monel K-500/NO5500/2.475;
Alloy 600/Inconel 600/NO6600/NS333/2.4816;
Alloy 601/Inconel 601/NO6001/2.4851;
Alloy 625/Inconel 625/NO6625/NS336/2.4856;
Alloy 718/Inconel 718/NO7718/GH169/GH4169/2.4668;
Alloy 800/Incoloy 800/NO8800/1.4876;
Alloy 800H/Incoloy 800H/NO8810/1.4958;
Alloy 800HT/Incoloy 800HT/NO8811/1.4959;
Alloy 825/Incoloy 825/NO8825/2.4858/NS142;
Alloy 925/Incoloy 925/NO9925;
Hastelloy C/Alloy C/NO6003/2.4869/NS333;
Alloy C-276/Hastelloy C-276/N10276/2.4819;
Alloy C-4/Hastelloy C-4/NO6455/NS335/2.4610;
Alloy C-22/Hastelloy C-22/NO6022/2.4602;
Alloy C-2000/Hastelloy C-2000/NO6200/2.4675;
Alloy B/Hastelloy B/NS321/N10001;
Alloy B-2/Hastelloy B-2/N10665/NS322/2.4617;
Alloy B-3/Hastelloy B-3/N10675/2.4600;
Alloy X/Hastelloy X/NO6002/2.4665;
Alloy G-30/Hastelloy G-30/NO6030/2.4603;
Alloy X-750/Inconel X-750/NO7750/GH145/2.4669;
Alloy 20/Carpenter 20Cb3/NO8020/NS312/2.4660;
Alloy 31/NO8031/1.4562;
Alloy 901/NO9901/1.4898;
Incoloy 25-6Mo/NO8926/1.4529/Incoloy 926/Alloy 926;
Inconel 783/UNS R30783;
NAS 254NM/NO8367;
Monel 30C
Nimonic 80A/Nickel Alloy 80a/UNS N07080/NA20/2.4631/2.4952
Nimonic 263/NO7263
Nimonic 90/UNS NO7090;
Incoloy 907/GH907;
Nitronic 60/Alloy 218/UNS S21800
The function of a cap is to block off the end of a line.
The cap is placed over the open end and welded around the join
Pipe Cap,Alloy Steel Cap,Pipe Fitting,Socket Cap
HeBei GuangHao Pipe Fittings Co .,LTD (Cangzhou Sailing Steel Pipe Co., Ltd) , https://www.guanghaofitting.com