Appropriate application of phosphate fertilizer in phosphorus-deficient soil has a good effect on improving the yield and quality of crops. Some farmers' friends mistakenly believe that the more phosphate fertilizer is applied, the better. In fact, excessive application of phosphate fertilizer is not only unhelpful, but also harmful.
First, the application of excessive phosphorus fertilizer will cause the crop to absorb too much phosphorus nutrition from the soil. Excessive phosphorus nutrition will promote the respiration of crops too strong, the dry matter consumed is greater than the accumulated dry matter, causing the reproductive organs to develop ahead of time, causing premature crop maturity, small grain and low yield.
The second is to induce zinc deficiency in the soil. Excessive application of calcium phosphate will cause zinc in the soil to interact with excessive phosphorus, resulting in zinc phosphate precipitation, which can not be absorbed by the crops, causing obvious zinc deficiency symptoms in the crops; excessive application of alkaline magnesium phosphate such as calcium magnesium phosphate fertilizer will cause soil alkali It reduces the effectiveness of zinc and affects the absorption of zinc by crops.
Third, excessive phosphorus application will cause the crop to lose phosphorus. According to the study, excessive application of phosphate fertilizer will also cause the silicon in the soil to be fixed and not absorbed, causing the crop to be deficient in silicon, especially for the grass crops of Si. If you can't absorb more silicon from the soil, if you can't absorb more silicon from the soil, you will suffer from silicon deficiency, such as slender stems, lodging and poor disease resistance.
Fourth, excessive phosphorus application will result in phosphorus deficiency in the crop. Appropriate application of phosphate fertilizer will promote the absorption of molybdenum by crops. However, excessive application of phosphate fertilizer will cause the phosphorus and molybdenum to lose nutrient balance, affecting the absorption of molybdenum by crops, and exhibiting “molybdenum deficiencyâ€.
The fifth is the accumulation of harmful elements in the soil. Phosphate fertilizer is mainly derived from phosphate rock, which contains many impurities. These include harmful elements such as cadmium, lead and fluorine. Moreover, the application of phosphate fertilizer will cause an increase in cadmium in the soil, and its annual growth rate is 0.15% and 0.08%, respectively, and the cadmium has high effectiveness and is easily absorbed by crops, causing harm to humans and animals.
Sixth, excessive application of phosphate fertilizer will cause deterioration of soil physical and chemical properties. Superphosphate contains a large amount of free acid and is applied in large quantities continuously, which causes acidification of the soil. Calcium magnesium phosphate contains 25%-30% lime. Large amounts of application can exacerbate soil alkalinity and deteriorate physical and chemical properties.
So what is the amount of phosphate fertilizer applied? Generally speaking, even in the case of phosphorus-deficient soil, the application rate per acre should not exceed 40 kg, preferably 30-35 kg.
· Dimension:
Welded: 16″ – 80″(DN 400 – DN 2000)
Seamless: 1/2″ – 30″(DN 15 – DN 750)
·Wall thickness: SCH5S–XXS
·Material: 1)Carbon & Alloy Steel: ASTM A234 WPB, WPC, WP1, WP11, WP22, WP5, WP9, WP91
ASTM A860 (MSS SP-75) WPHY42, WPHY46, WPHY52, WPHY60, WPHY65, WPHY70
ASTM A420 WPL3, WPL6
13CrMo4-5, 16Mo3, ASTM A515, ASTM A516, API 5L
PSL 1 B, X42, X46, X52, X56, X60, X65, X70, X80
PSL 2 B, X42, X46, X52, X56, X60, X65, X70, X80
2)Stainless Steel: ASTM A403 WP304, WP304L, WP304H, WP316, WP316L, WP317L, WP321, WP321H. UNS32304 / UNS31803 / UNS32205 / UNS32750 / UNS31260 / UNS32550 / UNS32760 / UNS32707
3)special alloy steel: Hastelloy B-2, Hastelloy C, Hastelloy C-276, Hastelloy C-4, Incoloy A-286, Incoloy 800HT, Incoloy 825, Inconel 600, Inconel 625, Inconel X-750, Inconel 718, Nimonic 80A, Nimonic 90, Nimonic 93
First, the application of excessive phosphorus fertilizer will cause the crop to absorb too much phosphorus nutrition from the soil. Excessive phosphorus nutrition will promote the respiration of crops too strong, the dry matter consumed is greater than the accumulated dry matter, causing the reproductive organs to develop ahead of time, causing premature crop maturity, small grain and low yield.
The second is to induce zinc deficiency in the soil. Excessive application of calcium phosphate will cause zinc in the soil to interact with excessive phosphorus, resulting in zinc phosphate precipitation, which can not be absorbed by the crops, causing obvious zinc deficiency symptoms in the crops; excessive application of alkaline magnesium phosphate such as calcium magnesium phosphate fertilizer will cause soil alkali It reduces the effectiveness of zinc and affects the absorption of zinc by crops.
Third, excessive phosphorus application will cause the crop to lose phosphorus. According to the study, excessive application of phosphate fertilizer will also cause the silicon in the soil to be fixed and not absorbed, causing the crop to be deficient in silicon, especially for the grass crops of Si. If you can't absorb more silicon from the soil, if you can't absorb more silicon from the soil, you will suffer from silicon deficiency, such as slender stems, lodging and poor disease resistance.
Fourth, excessive phosphorus application will result in phosphorus deficiency in the crop. Appropriate application of phosphate fertilizer will promote the absorption of molybdenum by crops. However, excessive application of phosphate fertilizer will cause the phosphorus and molybdenum to lose nutrient balance, affecting the absorption of molybdenum by crops, and exhibiting “molybdenum deficiencyâ€.
The fifth is the accumulation of harmful elements in the soil. Phosphate fertilizer is mainly derived from phosphate rock, which contains many impurities. These include harmful elements such as cadmium, lead and fluorine. Moreover, the application of phosphate fertilizer will cause an increase in cadmium in the soil, and its annual growth rate is 0.15% and 0.08%, respectively, and the cadmium has high effectiveness and is easily absorbed by crops, causing harm to humans and animals.
Sixth, excessive application of phosphate fertilizer will cause deterioration of soil physical and chemical properties. Superphosphate contains a large amount of free acid and is applied in large quantities continuously, which causes acidification of the soil. Calcium magnesium phosphate contains 25%-30% lime. Large amounts of application can exacerbate soil alkalinity and deteriorate physical and chemical properties.
So what is the amount of phosphate fertilizer applied? Generally speaking, even in the case of phosphorus-deficient soil, the application rate per acre should not exceed 40 kg, preferably 30-35 kg.
ã€Comment】 ã€Print this article】 ã€Close this page】 ã€Large, medium and small】
PVC resists corrosion and chemicals, exhibits high strength, and weighs less than fittings made from metal. PVC can be connected to other materials such as steel, copper, or cast iron using transition fittings. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries.
· Type: Elbow (45°, 90°,180°) / Tee ( straight&reducing) / Reducer ( Conc.&Ecc. ) / Cap / Cross / Lap joint stab ends
· Specification: ASME B16.9, MSS SP-75, EN10253-2/EN10253-1/EN10253-3, Gost 17175, DIN 2605· Dimension:
Welded: 16″ – 80″(DN 400 – DN 2000)
Seamless: 1/2″ – 30″(DN 15 – DN 750)
·Wall thickness: SCH5S–XXS
·Material: 1)Carbon & Alloy Steel: ASTM A234 WPB, WPC, WP1, WP11, WP22, WP5, WP9, WP91
ASTM A860 (MSS SP-75) WPHY42, WPHY46, WPHY52, WPHY60, WPHY65, WPHY70
ASTM A420 WPL3, WPL6
13CrMo4-5, 16Mo3, ASTM A515, ASTM A516, API 5L
PSL 1 B, X42, X46, X52, X56, X60, X65, X70, X80
PSL 2 B, X42, X46, X52, X56, X60, X65, X70, X80
2)Stainless Steel: ASTM A403 WP304, WP304L, WP304H, WP316, WP316L, WP317L, WP321, WP321H. UNS32304 / UNS31803 / UNS32205 / UNS32750 / UNS31260 / UNS32550 / UNS32760 / UNS32707
3)special alloy steel: Hastelloy B-2, Hastelloy C, Hastelloy C-276, Hastelloy C-4, Incoloy A-286, Incoloy 800HT, Incoloy 825, Inconel 600, Inconel 625, Inconel X-750, Inconel 718, Nimonic 80A, Nimonic 90, Nimonic 93
Remark: Products can be manufactured as per client's technical requirement of type, standard, dimension, wall thickness and material.
Butt Weld Pipe Fitting,Butt Weld Pipe Elbow,Butt Weld Pipe Bend,Steel Butt Weld Fittings
Shijiazhuang Bang dong Pipeline Technology Co,Ltd. , https://www.bd-pipefitting.com