Home toilet installation and maintenance precautions
As you might imagine, if the toilet is not installed properly, there will be many problems and it will be difficult to solve. Compared to any furniture installation in home improvement, the installation of toilets is particularly important. Problems in the installation process not only affect family life but also affect the family environment. Affect some daily activities. The owner of the toilet installation in the family may feel like a master, and he does not have to worry about. However, the toilet itself is home. The material of the master's toilet may not be a careful observation. After successful installation, you must also pay attention to maintenance in your life. Let's take a look at how professionals are helping us to detail the precautions for toilet installation and maintenance in the home.
1, the homeowner can check the toilet for damage. Before the toilet is installed, a full inspection of the sewage pipeline should be carried out to see if there is mud and sand, waste paper and other debris in the pipeline. Check whether the level of the toilet seat is horizontal before and after the installation. If uneven ground is found, install the toilet. The ground should be leveled. Open the toilet's packaging, remove it, and attach the hose to the back of the toilet. (The toilet fittings are mainly angle valves and hoses, which can be purchased by oneself or negotiated with the business owner).
2. Take a ruler to measure the distance between the wall and the sewage outlet on the ground. Turn the toilet upside down, make sure the center is on the sewage outlet of the toilet, and draw a cross centerline. The centerline should extend to the feet around the bottom of the toilet bowl. The distance between the homeowner's bathroom wall and the sewage outlet is 400mm, which just fits the 400-hole distance of the toilet. The installation of the master saves a lot of work. If the distance is 300mm after measurement, the 300-hole distance on the toilet can be used. In special cases, shifters are also needed. In most cases, the current house design is mostly 400mm.
3. Clean the floor around the sewage outlet to facilitate toilet installation. The homeowner can work together to install the master to close the toilet water valve.
4, install the angle valve. Afterwards, place the toilet bowl on the sewage outlet. After the control, use a pencil to dash along the toilet bowl to facilitate installation. Then place the toilet next to it. Determine the installation position of the bottom foot screw of the toilet, use the impact drill to make the installation hole, and pre-embed the plastic sleeve of the expansion screw.
5, along the pencil line, marked with glass glue. (This method of installation is a method that is currently used in many ways. It is simple, sturdy, and aesthetically pleasing. It is a lot more advanced than the previous method of laying cement tables.)
Toilet glass cement furniture home improvement glass furniture glass door bathroom design bathroom door bathroom leak
ABS Plastic Steel Tape Measure
ABS Plastic Steel Tape Measure
Shell made of ABS material, black rubber, can protect it from falling damage, durable, buckle and sling design, easy to carry, handheld and portable. Just pull the tape to lock the size in place. Perfect for daily use, travel, camping, etc.
It is suitable for kitchens, garages, manufacturing factories, steel factories, hardware stores, etc. it can be used to measure the length and width of measuring tools or casting aircraft, machines, furniture, etc., and it can be used to measure the accurate large tape.
Abs Plastic Steel Tape Measure,Abs Steel Measure Tape,Abs Rubber Tape Measure,Steel Tape Meter Stick Measure
Shangqiu Yuan Xiang Measure Tools Co., Ltd. , https://www.yuanxiangtool.com