1. You can use a soft cloth to apply warm water or neutral detergent. Wipe the exposed outer casing first, then open the front panel of the air conditioner and wipe the inside of the air conditioner, including the air outlet, the inside of the air conditioner cover, and some dead corners. Location, and finally dry with a dry soft cloth.
2. Cleaning of the filter
Remove the filter according to the instructions, gently pat or use a vacuum cleaner to remove dust. If there is too much dust in the dust filter, it can be washed with water or soft brush with neutral detergent. However, the water temperature should not exceed 50 °C during cleaning. Do not use detergent, detergent, gasoline or banana water to avoid deformation of the filter. . Rinse off with clean water, dry with a soft cloth or dry in a cool place. Do not expose to the sun or expose it to an open flame such as a stove to avoid deformation of the filter.
3. Heat sink disinfection
This is the most important step in air conditioning cleaning. After unplugging the power supply, use a special air-conditioning cleaner to repeatedly spray the heat sink up and down 2-3 times, wait 5 minutes, let the detergent fully contact the heat sink and kill the bacteria attached to it, then put it back on the filter. , cover the panel, plug in the power, run the cooling mode for 20-30 minutes. The condensed water generated during cooling will help the cleaning agent to better dissolve the dust and kill the bacteria, and the generated sewage will be discharged through the drain pipe without causing secondary pollution.
Media Facade Light,Landscape Lighting Screen,Transparent Flexible Led,Waterproof Led Linear Light
Shen zhen SH LED Technology Co.,Ltd , https://www.pixellightsolutions.com