Problems to Consider When Designing Home Wiring and Home Wiring
1. The number of information points
Normally, since the master bedroom usually has two owners, it is recommended to install two information points so that both parties can use the computer at the same time. The other bedroom and living room only need to have one information point for children or when temporarily changing the computer's location. Especially when you have a laptop, you should consider installing an information point in each room and hall. Restaurants usually do not need to install information points because very few people use computers there. If the cell has reserved information interfaces, a twisted pair from the interface to the hub device should be deployed to achieve broadband connection between the home network and the cell.
In addition, it is best to place 2 to 3 information points in the hidden location of the center of the residence and the front and rear balconies to prepare for the installation of wireless network access points in the future, to achieve a wireless network connection for the home computer, and to carry the laptop to the outdoor jobs.
2. Information outlet location
When choosing the location of the information outlet, it is also necessary to pay attention to it, which is to be easy to use, not to be blocked by the furniture, but also to be hidden and inconspicuous. In the bedroom, the information outlets can be located on both sides of the bed; in the living room Located at the end of the sofa near the window; in the study, it should be located near the desk, and the vertical distance between the information outlet and the ground should not be less than 20cm.
3. The location of the hub device
Since the hub equipment is rarely touched, the hub equipment should be located in the most concealed position on the premise of ensuring good ventilation. It should be noted that the hub device needs the support of the power supply. Therefore, it is necessary to provide the power outlet for the hub device during the renovation. In addition, the hub equipment should be installed in locations where it is wet, easily wetted, and has very serious electromagnetic interference.
4. Keep away from interference sources
Twisted pair and computer should be far away from washing machines, refrigerators, air conditioners, and fans to avoid interference with transmission signals in twisted pair.
5. Separate power supply
The power cords used by computers, printers, and hub devices should be separated from the power cords used by fluorescent lamps, washing machines, refrigerators, air conditioners, and fans to provide independent power supply to ensure the safety and stability of the computer.
6. Routing
Twisted pair should avoid direct sunlight, should not be placed in the wet place. In addition, it should be kept away from frequently used channels and heavy objects to avoid possible friction and to ensure the electrical performance of the twisted pair.
Living Room Air Conditioning Sockets Electrical Appliances Home Furnishing Window Furniture Decor Living Room Master Bedroom Renovation Computer Sofa Cloth Sofa Study Furniture Small Study Restaurant Furniture Small Bedroom Balcony Study Bedroom Lamp
Low Hardness O Ring,Acid Proof O-Ring,Vmq O-Rings
Xlong Seal Co., Ltd. , http://www.xmseals.com