>>> New Year's home carpet cleaning tips
Laying method:
There are carpet carpets and coiled carpets in different forms, with different laying methods and laying positions.
1. Active laying: It means that the carpet is placed on the base floor in a clear and floating manner without fixing the carpet to the base layer.
2. Fixed laying: There are two fixing methods for fixed paving, one is card-type fixing, using a barbed plate to pull the carpet;
One is a bonding method that uses an adhesive to adhere the carpet to the floor.
Basic carpet floor decoration process:
(1) Card type fixing method:
Grassroots cleaning → Carpet cutting → Nail barbed plate → Underlayment → Joint → Zhangping → Fixed carpet → Edge trim → Repair carpet surface → Sweep.
(2) Paste fixing method: Floor treatment → Actual weight release line → Cut carpet → Squeegee open → Lay silver pressure → Clean and protect.
Construction points:
1, before the pavement must be carried out in real quantities, measure whether the angle of the corner, accurately record the angle of each angle. According to the calculation of the blank size on the carpet back line, cutting.
2. The barbed plate is fixed and a barbed nail plate is laid along the wall. The barb plate is 8 mm away from the skirting board.
3, the joints of the application of tape in the carpet on the back of the two carpets affixed together, we must first trim the villi at the seams, and repeatedly rub joints at the villi, to the surface can not see the seam marks to.
4. After glueing and laying, put it on for 5~10 minutes after glueing, and lay it when the glue liquid becomes dry and sticky.
5, after the carpet is laid, tighten the tie with the needles, Zhang Ping, hanging on the barbed plate. Adhesive is used. After the carpet is laid flat, air bubbles are pressed with a felt roll.
6, cut the excess carpet edge, clean up the fiber pulled.
7. When cutting the carpet, the carpet should be cut along the carpet warp, cutting only the weft yarn and not cutting the warp yarn. For carpets with backing, separate the villi from the front and find the warp and weft after cutting.
Precautions:
1. Pay attention to the protection of the finished product. Use glued carpet and do not step on it for 24 hours.
2. The requirements for the ground floor of the carpet pavement are relatively high. The ground must be flat and clean. The moisture content must not exceed 8%. The skirting board has been installed. The gap between the lower edge of the skirting board and the floor should be 2~3 mm thicker than the carpet thickness.
3. Accurately measure the room size and calculate the blank size so as not to cause waste.
4. After the carpet is laid, it must be tightened, flattened, and fixed to prevent deformation in the future.
Experience talk room decoration home
Sulfate, a compound consisting of sulfate ions (SO42 -) and other metal ions, are electrolytes and most of them are soluble in water.
Sulphate mineral is a kind of salt which is composed of metal element cation (including ammonium) and sulfate.
With high quality and first-Class service, we have successfully win the trust of customers all over the world, both small companies and big enterprice, and we shall continue the high quality products provided and improve our service to get the Win-win result.
Sodium Bisulfite,Sodium Bisulfite Solution,Sodium Bisulfite Anhydrous,Industrial Grade Sodium Bisulfite
Shijiazhuang Xinlongwei Chemical Co., Ltd. , http://www.xinlongwei-chem.com