Abstract: High-pressure spray guns can be used for cleaning in the food industry, electro-mechanical cleaning, ship cleaning, reinforced concrete crushing, metal and non-metal cutting and punching and hole drilling. Below, let us know the instructions for using high-pressure spray guns for cleaning, high-pressure spray guns. What are the precautions.
[Use of high pressure spray gun] Instructions for use of high pressure spray gun for cleaning High pressure spray gun use precautions
First, the use of high pressure spray gun
Select the appropriate cleaning nozzle and select a suitable cleaning nozzle to rotate the nozzle at the nozzle according to the instrument being cleaned.
Nozzle function:
1. It is used to clean the syringe and the trocar, and can be connected to the injection needle;
2. For rapid cleaning of instruments;
3. For cleaning syringes and catheter needles with "luer" connectors;
4. Used to clean the drainage tube;
5. Used to clean pipettes, pipettes and measuring tubes;
6. Used to clean catheters, faucets, valves, and endoscopes;
7. used to clean glassware;
8. The ejector is used for suction flushing.
Cleaning: Open the pipeline valve, align the nozzle of the gun with the equipment to be cleaned, pull the trigger, and rinse repeatedly with water or gas until the dirt is completely washed away; close the pipeline valve after the gun is used.
Second, the use of high pressure spray gun
1. Since the spray gun will generate a certain amount of pressure during use, please do not use it directly on the human body.
2. When the spray gun is in the water supply operation, the spray direction of the spray head should be away from the power supply and electrical equipment to avoid the risk of electric shock.
3. When the water pressure is less than 2kg/cm2, it is recommended to install a booster pump to make the spray gun fully clean.
4. When using compressed air or other gases, you can choose the connector that is compatible with the pipeline.
5. The cleaning head of the spray gun and the silicone rubber parts on the handle have a maximum temperature resistance of 150 degrees; the spring tube has a maximum temperature resistance of 80 degrees and a maximum withstand voltage of 8 kg/cm2; therefore, when using and disinfecting, please do not More than this range.
6. Please do not place the parts of the spray gun and the nozzle with silicone rubber parts in the oil and paraffin medium to avoid aging deformation of the silicone rubber parts.
7. After the spray gun is used for a long time, the seal ring at the nozzle may be aging and worn, resulting in poor sealing. Please replace the nozzle seal ring provided by the manufacturer in time.
8. When the spray gun fails, please do not disassemble the spray gun. Please contact the dealer in time. 
Editor in charge: Zhao Hongli
Electronic Air Purifier,Air Cleaner Ionizer,Pm 2.5 Air Cleaner,Air Cleaner Dust
Dongguan V1 Environmental Technology Co., Ltd. , https://www.v1airpurifier.com