Bathroom tiles pictures
Bathroom tile selection method:
1. Look at the glazed surface of the bathroom tiles. The surface of the tiles should be smooth and delicate. The high-gloss glazed tiles should be crystal clear and glossy. The matt and semi-gloss glazes should be soft and reflective. You can try to scratch the tile surface with a hard object. If there is a scratch, it means that the glaze is not enough. After the glaze on the surface is polished, the brick surface will be easily contaminated and difficult to clean. Secondly, to see if the product size is standard, diagonal lines can be measured with calipers. Irregular tiles will not form a straight line when paving, resulting in unsightly appearance. Third, see the deformation, can be observed directly with the naked eye, look at the product side straight flat, so that the product deformation is small, easy construction, paving the brick surface flat and beautiful. Look at the pattern four, the pattern of color should be delicate, realistic, there is no obvious defects such as lack of color, broken line, dislocation.
2. Look at bathroom tile packaging. First look at the factory name, site and trademark, so as not to buy "three no" products. Second, look at the product quality level and the size of the water absorption. In general, the lower the water absorption rate, the higher the strength and the better the frost resistance. If users purchase ceramic tiles mainly for floor covering or for outdoor wall surfaces, they must purchase products with low water absorption, such as porcelain tiles or enamel tiles. If users purchase bricks mainly for interior walls, such as kitchen and bathroom walls, products with higher water absorption rates, such as ceramic bricks, can be used. However, it should be pointed out that these products have relatively high requirements for resistance to cracking, thermal shock resistance, pollution resistance and chemical resistance. Third, look at the friction properties of the product. If users purchase ceramic tiles for floor covering, they need to check the friction coefficient and wear level of the products.
Bathroom tiles pictures
3. Look at the bathroom tile surface quality.
The first thing to look at is whether or not the colors are pleasing to the eye and meet their own aesthetic tastes. Secondly, about 1 meter away from the sample, in a certain light conditions, observe whether the sample lacks glaze, cracks, smoke, falling dirt, glaze, spots, bumps and other surface defects; about 3 meters away from the sample, observe the surface of the product Color difference in order to get a rough grasp of the product's gloss. Third, gently tapping the sample with your hand or a hammer. If there is a metallic echo, it indicates that the product structure is rich; if there is stuffy sound, it indicates that the product may have structural delamination defects.
4. Look at the bathroom tile selection
First of all, according to personal preferences and functional requirements of the room and the required field layout, screening from the specifications, colors, texture and other aspects of the floor tiles. Good quality floor tiles are uniform in size, uniform in thickness, flat on the surface of floor tiles. 5. Look at the quality of bathroom tiles.
First, remove one piece from the packing box to see whether the surface is flat and in good condition. The glaze should be uniform, bright, spotless, lack of glaze, bumping, and the surrounding edges should be regular. Glazing is not bright, astringent, or air bubbles are quality problems.
See the rules. Take out a piece of brick and align two pieces. The smaller the middle gap is, the better. If it is a pattern tile, four pieces must be used to piece together a complete pattern, and whether the pattern of the brick should be connected and clear should be considered. Put these bricks together and put them together. Compare the sizes of the bricks. The deviation of the small bricks is allowed to be plus or minus 1 mm. The large bricks are allowed to be plus or minus 2 mm.
Bathroom tiles pictures
5. Look at the bathroom tile to pick the color difference. Remove a box of bricks and place them on a large flat surface. Look at the entire effect from a little distance away. Whether it is white or other colors or patterns, the color should be the same. If there are individual bricks, shallow points, it will be difficult to see. Affects the entire decorative effect.
6. Look at the flatness of the bathroom tiles. The sides are straight and easy to lay, and the effect is good. (For visual inspection, place the tiles on a flat surface and see if the four sides are completely in line with the flat surface. Also check if the four corners of the tiles are all right angles. Then place the tiles in the same position. Observe the color difference in the variety and the same type of tile)
Editor's note: The selection of bathroom tiles and the appreciation of bathroom tiles are here. If you want to know more information, you can pay attention to this website information, or go to this website to find more favorite products!
Tile Tiles Buy Tiles Brand Decorative Bathroom Tiles Bathroom Tiles Bathroom Picture Bathroom Size Exterior Wall Tile Tile Specification Kitchen Tile Tile Picture ld Tile
Black Lamp,T8 Blb Light,T8 Blb Bulb,T8 Blb Tube
Changxing leboom lighting product CO.Ltd. , https://www.leboomuvs.com