What if the IKO linear bearing fails during use? Demolition inspection is certainly a good idea, but this method is time-consuming, below, Star Scientific hardware network Xiaobian to bring you a small way if you can not identify or predict operation by removing the check in the IKO bearing failure.
First, through the special person or listener, listening to the sound bar for bearing sound recognition
It takes a lot of experience to identify by sound. Must be fully trained to recognize IKO bearing sounds and non-bearing sounds. To this end, the work should be carried out by a dedicated person. The sound of the linear bearing can be clearly heard by attaching a listener or a listening stick to the housing.
Second, through the status of IKO bearing lubricant identification
First, the lubricant is sampled and analyzed, and it is judged whether or not the degree of contamination is mixed with foreign matter or metal powder. This method is especially effective for bearings or large bearings that cannot be viewed close together.
Third, through the working temperature of IKO bearing identification
This method is a comparative identification method and is limited to occasions where the operating state does not change much. For this purpose, continuous recording of the temperature must be carried out. In the event of a fault, not only does the temperature rise, but irregular changes occur.
Concerned about surprises
Tags: IKO large bearing microblogging listener disassembly
Previous: Six types of power tools Next: Springs widely used spring machine came into being
PVC coated wire, also called plastic coated wire, after high temperature dissolution cooled solid PVC particles uniformly wrapped in high quality black iron wire and galvanized wire through advanced equipment.
Pvc Wire,Pvc Coated Wire,Pvc Plated Wire,Pvc Coated Electro Galvanized Wire
Shenzhou City Hongda Hardware Products Co.,Ltd , https://www.hdgabion.com