Most families treat these remaining floors as scrap or recycling. However, in fact, these scraps can be fully utilized. After simple processing, they can become very useful items.
Transforming method: The simplest use of the rest of the balcony's flower racks is to put them into a flower stand, especially for some families where the balcony space is large. A stainless steel bracket can be installed on the walls on both sides of the balcony, and then the floor. The corners were neatly laid out and a simple "flower garden" was born. Planting some green plants such as spider plants and vines not only can decorate the balcony space, but also can arrange the balcony into an elegant leisure area. After the flower stand is erected, if there is still the remaining floor “scrapâ€, a row of floor trim can also be placed against the wall under the flower garden and fixed with viscose to hold small green plants or potted plants such as cactus and monstera. plant.
In addition to the flower stand that can be transformed into a balcony, if the width of the floor scrap can reach 10 cm or more, the combination of "stainless steel bracket + floor waste" can appear on the blank wall of the kitchen, and it becomes a simple and powerful storage function. The cabinet is used to store condiments, dishes and other supplies. The same method can also be "replicated" into the bedroom and built into a simple bookcase.
Transfiguration II: The desk of the desk The books and documents on the desk often need to be fixed with a book holder. Good quality flooring is often hard texture, and beautiful patterns, so use this "scrap" floor to make book holders and then more appropriate.
The production of the book holder is not complicated. Only two floors of the same size are required, and then a groove is formed on the floor with the appropriate width, and the other floor is then partially glued and glued together to form an “x†shape. The edge of the floor was leveled with a saw, and finally a thin iron sheet was bound at the bottom of the floor. A simple book clip was formed.
If the color of the floor is light, you can also paint the book clips according to your preference, or you can paint them with cute designs. There is no taste in the room.
Transfiguration III: The display cabinet in the living room is a good way to make the remaining material of the floor into a small display cabinet. However, the production method of the display cabinet is a little more complex, requires stronger hands-on ability, and takes more time. .
The thickness of the bottom plate of the display cabinet is wider than the side panel, so it is more beautiful, but if you can not evenly cut the floor into two pieces to make the floor thinner for the side panel of the display cabinet, you can also keep the original thickness of the floor. The height of a side panel should be about 10 centimeters apart, so that the display cabinet will have a sense of height and height.
The most troublesome thing in production is the floor of the display cabinet. In order to fix the side plates, the bottom plate needs to be grooved, and then the side plates are embedded in the bottom plate. The top plate is relatively simple to manufacture and can be directly fixed on the side plates with a nail. The display cabinet made is placed in the corner of the living room. It is fun to put small vases and small ornaments on it.
Transfiguration 4: The storage cabinets in the corners are always better in the living room. The use of corners as storage areas has also become more and more popular. In particular, the balcony connecting the kitchen should share the pressure on the kitchen.
After the decoration, the “grand material†in the remaining floor is simply splice, and a storage rack can be made to store large pots, barrels of oil, bags of rice, etc. The finished storage cabinet has good performance.
It should be noted that the production process of such storage cabinets is relatively complex and it is best to be manufactured by carpenters after the floor is finished.
Transforming method: The simplest use of the rest of the balcony's flower racks is to put them into a flower stand, especially for some families where the balcony space is large. A stainless steel bracket can be installed on the walls on both sides of the balcony, and then the floor. The corners were neatly laid out and a simple "flower garden" was born. Planting some green plants such as spider plants and vines not only can decorate the balcony space, but also can arrange the balcony into an elegant leisure area. After the flower stand is erected, if there is still the remaining floor “scrapâ€, a row of floor trim can also be placed against the wall under the flower garden and fixed with viscose to hold small green plants or potted plants such as cactus and monstera. plant.
In addition to the flower stand that can be transformed into a balcony, if the width of the floor scrap can reach 10 cm or more, the combination of "stainless steel bracket + floor waste" can appear on the blank wall of the kitchen, and it becomes a simple and powerful storage function. The cabinet is used to store condiments, dishes and other supplies. The same method can also be "replicated" into the bedroom and built into a simple bookcase.
Transfiguration II: The desk of the desk The books and documents on the desk often need to be fixed with a book holder. Good quality flooring is often hard texture, and beautiful patterns, so use this "scrap" floor to make book holders and then more appropriate.
The production of the book holder is not complicated. Only two floors of the same size are required, and then a groove is formed on the floor with the appropriate width, and the other floor is then partially glued and glued together to form an “x†shape. The edge of the floor was leveled with a saw, and finally a thin iron sheet was bound at the bottom of the floor. A simple book clip was formed.
If the color of the floor is light, you can also paint the book clips according to your preference, or you can paint them with cute designs. There is no taste in the room.
Transfiguration III: The display cabinet in the living room is a good way to make the remaining material of the floor into a small display cabinet. However, the production method of the display cabinet is a little more complex, requires stronger hands-on ability, and takes more time. .
The thickness of the bottom plate of the display cabinet is wider than the side panel, so it is more beautiful, but if you can not evenly cut the floor into two pieces to make the floor thinner for the side panel of the display cabinet, you can also keep the original thickness of the floor. The height of a side panel should be about 10 centimeters apart, so that the display cabinet will have a sense of height and height.
The most troublesome thing in production is the floor of the display cabinet. In order to fix the side plates, the bottom plate needs to be grooved, and then the side plates are embedded in the bottom plate. The top plate is relatively simple to manufacture and can be directly fixed on the side plates with a nail. The display cabinet made is placed in the corner of the living room. It is fun to put small vases and small ornaments on it.
Transfiguration 4: The storage cabinets in the corners are always better in the living room. The use of corners as storage areas has also become more and more popular. In particular, the balcony connecting the kitchen should share the pressure on the kitchen.
After the decoration, the “grand material†in the remaining floor is simply splice, and a storage rack can be made to store large pots, barrels of oil, bags of rice, etc. The finished storage cabinet has good performance.
It should be noted that the production process of such storage cabinets is relatively complex and it is best to be manufactured by carpenters after the floor is finished.
Henan liangjin tools co.,Ltd founded 1999, is a modern chemical measuring tool manufacturer integrating scientific research, development, production and export sales.
The company has self-supporting import and export rights, and more than 90% of its products are exported to Italy, More than 60 countries and regions, including Spain, the Netherlands, Poland, Russia, Nigeria, India, Iran, South Africa, Japan, Brazil, ELDOR, etc
Steel Tape Measure,Tape Ruler Measurements,Tape Measure Tool,Metal Case Tape Measure
Henan Liangjin Tools Co.,Ltd , http://www.liangjintools.com