[Pump News Asia] to stop the pump sequence is one of the important steps in the operation of high-pressure reciprocating pump, then the high-pressure reciprocating pump in the stop pump, what order to comply with it? The following is the order of the high-pressure reciprocating pump to stop the pump. High pressure reciprocating pump stop pump sequence (1) received a hydraulic press "request shutdown" signal, immediately send back to the hydraulic press "can stop" signal; (2) the water tank to supplement the water level above 7; (4) cut off the pump power, are not allowed to stop the pump with a load; (5) after the high-pressure pump stops running, cut off the lubricating oil pump power, turn off the oil cooling water valve. Extended reading: China Construction Water Exhibition water pump manufacturers rankings ptc exhibition motor top ten brands pump valve pipe fittings Show Information Industry Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat: 2355962924) http: // mj .liuti.cn / (Service Hotline: 400-6030-811)