Drainage is the fluorine plastic centrifugal pump often encountered a failure, then when faced with such a failure, we know where the reason? And how to deal with? The following is about the fluorine plastic centrifugal pump The reason of not draining and handling method introduction. Fluoroplastic centrifugal pump does not drain the reasons and solutions (1) insufficient pump (or the pump is not discharged). In such cases, you can take the re-irrigation of the treatment. (2) The pump is not turning properly. Approach is to check the direction of rotation. (3) pump speed is too low. Can be used to check the speed, speed increase processing methods. (4) filter plug, the valve is not working. When faced with this reason, you need to check the filter to eliminate debris. (5) suction height is too high, or vacuum suction tank. Approach is to reduce the suction height; check the suction tank pressure. Read more: China Building Water Exhibition Pump Valve Tube Fittings Exhibition Water Expo Xiamen Maritime Exhibition Internet + Forum Yiwu Expo Industry Interconnection (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat: 2355962924) http://beng.liuti.cn/ (service hotline: 400-6030-811)