Explosion-proof electrodeless lamp is a new generation of high-tech lighting products integrating explosion-proof, protective, electronic, photoelectric, vacuum and other technologies. Mainly used for lighting in drilling, oil production platforms, oil production equipment, oil refineries, chemical plants, steel, electric power, mining and other occasions; and can be applied to fixed lighting of land, ocean drilling rigs, workover rigs with vibration operations. Explosion-proof electrodeless lamp has long service life, high luminous efficiency and energy saving. It is especially suitable for areas where inconveniences in the hazardous areas are maintained and disassembled.
Explosion-proof electrodeless lamps work reliably under the following conditions:
1. There is no limit to the altitude of the installation site.
2, when the ambient temperature is -20 °C ~ +40 °C, and the average value within 24h does not exceed 35 °C
3. The relative humidity of the air at the installation site shall not exceed 50% when the maximum temperature is +40°C. Higher relative humidity is allowed at the lower temperature, and the minimum monthly average humidity is not more than +25°C. The monthly average maximum relative humidity does not exceed 90%.
4, in the absence of violent vibration, impact and shaking place.
5. Sites containing explosive gas atmospheres.
6, the pollution level is 3.
Explosion-proof electrodeless lamp structure features:
1, in strict accordance with the national explosion-proof standards for production and control, explosion-proof type of the highest explosion-proof grade, reliable explosion-proof performance.
2, equipped with a new generation of maintenance-free energy-saving light source -------- no aurora, no flicker, high luminous efficiency, light decline, life expectancy up to 80000H, to achieve maintenance-free, display index RA up to 99, power factor As high as 0.9 or above, cold start and hot start can be performed immediately.
3, the use of high-tech spray technology, anti-corrosion grade to WF2, to ensure that the lamps in salt and other harsh environments are not corrosive.
4, good electromagnetic compatibility, will not cause electromagnetic interference to the surrounding environment or electrical equipment.
5, with a special cable introduction device, good sealing performance, direct pipe or cable wiring.
6, the installation method can choose to use the hanger type, wall-mounted, ceiling-mounted and other installation methods.
Explosion-proof electrodeless lamps work reliably under the following conditions:
1. There is no limit to the altitude of the installation site.
2, when the ambient temperature is -20 °C ~ +40 °C, and the average value within 24h does not exceed 35 °C
3. The relative humidity of the air at the installation site shall not exceed 50% when the maximum temperature is +40°C. Higher relative humidity is allowed at the lower temperature, and the minimum monthly average humidity is not more than +25°C. The monthly average maximum relative humidity does not exceed 90%.
4, in the absence of violent vibration, impact and shaking place.
5. Sites containing explosive gas atmospheres.
6, the pollution level is 3.
Explosion-proof electrodeless lamp structure features:
1, in strict accordance with the national explosion-proof standards for production and control, explosion-proof type of the highest explosion-proof grade, reliable explosion-proof performance.
2, equipped with a new generation of maintenance-free energy-saving light source -------- no aurora, no flicker, high luminous efficiency, light decline, life expectancy up to 80000H, to achieve maintenance-free, display index RA up to 99, power factor As high as 0.9 or above, cold start and hot start can be performed immediately.
3, the use of high-tech spray technology, anti-corrosion grade to WF2, to ensure that the lamps in salt and other harsh environments are not corrosive.
4, good electromagnetic compatibility, will not cause electromagnetic interference to the surrounding environment or electrical equipment.
5, with a special cable introduction device, good sealing performance, direct pipe or cable wiring.
6, the installation method can choose to use the hanger type, wall-mounted, ceiling-mounted and other installation methods.
Smart Night Light,Led Pool Light,Swimming Pool Lights,Swimming Pool Led Lights
Guangdong Smart Street Lighting Co., Ltd , https://www.fldlight.com