[Asia Fluid Network News] infusion pump product variety, performance, so as to provide the greatest infusion system protection. In accordance with the characteristics of work and ability to work, infusion pump can be divided into peristaltic infusion pump, constant volume control infusion pump and syringe micro-infusion pump three. As it continues to expand the use of the exposed problems and failures are gradually emerging, then the infusion pump failure solution what? Infusion pump failure solution A, pump open solution: close the pump door and lock. Second, low battery solution: immediately connected to AC power. Third, the liquid bottle / bag empty solution: new liquid, adjust, exhaust, or remove the infusion device. Fourth, the pipeline obstruction Solution: Check the following possible obstruction and rule out the pipeline is folded, scroll clamp is closed, the needle is blocked; if other causes, can adjust the obstruction sensor pressure value. Fifth, the infusion tube air solution: first infusion to step up, no drop drip, the infusion tube removed from the device, the gas row to the drip chamber, the pipeline reset, release the infusion Clamping machine. Infusion pump use more or less there are still some use fault, then you need to make the user according to the actual situation of the fastest and most reasonable treatment. We all know that accidental infusion can have serious consequences, so infusion pumps must be used very carefully.
Zhejiang Nanhua Electronic Technology Co., Ltd , https://www.nhloadcells.com