A good piece of furniture is made of good wood and good craftsmanship. We all know that the production of traditional furniture is indispensable for carving and carving, but you know that "scratching" is also an extremely important part. The fineness of a piece of furniture directly determines whether the surface is beautiful, shiny and smooth, which in turn determines the value of the furniture. The so-called "three-point, seven-point work" is not unreasonable. Today, Bosen Furniture tells you that good mahogany furniture is slowly "grinding".
The manufacturing process of mahogany furniture is very complicated, especially in terms of scraping, and the most people are invested. In order to make the furniture flat, straight, smooth and slippery, at least the grinding process from the coarse to the tenth in the scraping process must be carried out. In each process, the shaving master must thoroughly scrape the traces left by the previous process. Use the finest tools to polish the surface of the furniture smoothly.
The scraping process is very particular. In order to ensure good scraping effect and aging, professional scraping technology and special tools are needed. The scraping process is an important guarantee that the whole furniture can finally present a beautiful appearance. The scraping tool is not only a scraper, but also a knife, a planer, a hoe, etc., which distinguish different specifications and models, and are suitable for scraping different parts and performing different treatments.
The scraping process consists of two small steps of scraping and sanding. The scraping must be carried out in a smooth manner to ensure that the scraping corners are in place and the edges are sharp. Grinding is to polish some curved parts of the furniture, intractable dead corners, and parts that cannot be scraped with a scraper. The traces left by the scraping and the uneven and smooth places must be thoroughly smoothed and polished. In the process of grinding, it is necessary to polish along the wood grain, otherwise it will be rougher and rougher; the force should be even when grinding, so that the surface of the furniture can be smooth, no cracks, no burrs, and the requirements of water-free wiping without ripples can be achieved. . According to Guangdong Huasheng Furniture Group, the famous Dingtan mahogany furniture scraping master introduced: "Scratch also requires skill, good technology, can make the furniture icing on the cake; if the technology is not good, it may also scrape the good things, the scraper The experience is very important."
Scratching is not done overnight, and a part is subject to repeated scraping for hundreds of times. In order to make the furniture look shiny and woody, the famous Dingtan mahogany furniture scraping master uses a variety of different types of sandpaper to polish the furniture. These different types of sandpaper also have a division of labor during the grinding process of the furniture . The sandpaper of the 120-600 model is used to polish the basic shape of the furniture. The sandpaper of the 600-1500 model is the detail of the polished furniture, and the sandpaper of the 1500-2500 model. It is to make the furniture more charm, this step is also called water mill. After such complicated procedures, it is these hard work and sweat that have created the extraordinary value of mahogany furniture.
"One touch and two look"
The so-called touch is to gently stroke back and forth with your hand.
When touching, do not follow the lines, but should reverse the lines to identify whether the surface is smooth and smooth. When you touch, the position you touch is also very important, you can not ignore the negative side of the furniture. For traditional furniture, it can be divided into a shaded face and a sunny face. The male side refers to the directly visible parts, such as the table top, the back of the chair, the legs, etc., while the shaded side is a hidden part that is not easy to see, such as the bottom of the table, the inner corner of the leg, the back of the dental plate, and the like.
When touching, use light force, not only to touch the sunny side of the furniture, but also to caress several times in the invisible shades of it. At least touch the three shades, and feel the smoothness and delicateness with the touch of the hand. If you wear hard furniture, you will feel lubricated like baby skin when you touch it. Otherwise, you should carefully consider it.
The second look means looking far and near.
From a distance, it is to see whether the contour of the whole furniture is symmetrical, whether the corners are flush, and whether the overall structure is coordinated. If you look at the texture of the furniture, whether it is clear and bright, whether the lines are consistent, and then see if the gap at the joint is moist. Run, with or without cattle burrs.
Grinding the furniture in place, you can basically do the whole body moist, look like one. No matter where you look, you won't find a bit of awkwardness.
Kitchen Faucet,Kitchen Taps,Brass Kitchen Faucet,Sink Mixer Kitchen Faucet
Zhejiang minmetals huitong import and export Co., Ltd , https://www.zjminmetals.com