Model NO.: inconel 625
standard: GB/ASTM/JIS/BIS/DIN
surface: bright
Sample: Free
Trademark: TANKII
Transport Package: in Coil/Spool
Specification: 0.1-100mm
Origin: Shanghai, China
HS Code: 74082200
Nickel alloy N06625 inconel 625/600/601/690 seamless tube/pipe/sheetGeneral Description
Inconel 625, a nickel-chromium-molybdenum alloy contains 9% Moly, serves effectively as both a corrosion resistant and heat resistant material. The combination of high-temperature strength and resistance to halogen attack, oxidation, and carburization has made alloy 625 a popular choice for chemical and petrochemical process equipment exposed to hostile, hightemperature environments.
The high alloy content of Inconel 625 enables it to withstand a wide variety of corrosive environments. The alloy is almost completely resistant to mild environments such as the atmosphere, fresh water and seawater, neutral salts, and alkaline media. In more severe environments, the combination of nickel and chromium provides resistance to oxidizing chemicals, and the combination of nickel and molybdenum provides resistance to reducing conditions. The molybdenum content also makes Inconel 625 highly resistant to pitting and crevice corrosion. The columbium stabilizes the alloy against sensitization and prevents intergranular corrosion. The high nickel content provides freedom from chloride stress-corrosion cracking.
Inconel 625 made by NiWire is made into chemical processing equipment, aircraft engine and airframe components, ship and submarine parts
Chemical Composition
| Grade | Ni% | Cr% | Mo% | Nb+Ta% | Fe% | Al% | Ti% | C% | Mn% | Si% | Cu% | P% | S% |
| Inconel 625 | Min 58 | 20-23 | 8-10 | 3.15-4.15 | Max 5 | Max 0.4 | Max 0.4 | Max 0.1 | Max 0.5 | Max 0.5 | Max 0.5 | Max 0.015 | Max 0.015 |
| Grade | UNS | Werkstoff Nr. |
| Inconel 625 | N06625 | 2.4856 |
| Grade | Density | Melting Point |
| Inconel 625 | 8.4 g/cm3 | 1290°C-1350 °C |
| Condition | Tensile Strength | Yield Strength σp0.2/MPa | Elongation | Brinell Hardness |
| Annealing Treatment(Grade 1) | 850 Mpa | 450 Mpa | 30% | ≤220 |
| Solution Treatment (Grade 2) | 700 Mpa | 300 Mpa | 30% | ≤200 |
Our Production Standard
| Standard | Bar | Forging | Pipe | Sheet/Strip | Fittings |
| ASTM | ASTM B446 | ASTM B564 | ASTM B444/B704/B705 | ASTM B443 | ASTM B366 |
Any traditional welding procedures can be used to weld Inconel 625 to similar alloys or other metals, such as gas tungsten arc welding(GTAW), plasma arc welding (PAW), metal inertia gas welding (MIG) and so on. Before welding, remove scale, grease, mark and imprint. And no heat treatment needed before and after welding. Recommend filler wire regarding welding Inconel 625: ERNiCrMo-3
Size Range
Inconel 625 wire, bar, rod, forging, plate, sheet, tube, fastener, pipe fittings and other standard forms are available.
Â
The Morse taper shank Drill Bit is a self-locking (or self holding) taper of approximately 5/8" per foot that allows the torque to be transferred to the drill bit by the friction between the taper shank and the socket. The tang at the end of the taper is only for ejecting the drill bit from the spindle, with the aid of a drift.
The arbor of a drill chuck is often a Morse taper and this allows the chuck assembly to be removed and directly replaced with the shank of a Morse taper drill bit.
Its material is high speed steel,treatment process is roll-forged
Taper Shank Drill Bit,Shank Drill Bit,Taper Shank Drills,Twist Drill
Behappy Crafts (suzhou)Co.,Ltd , https://www.behappyindustry.com