"China Machine Tool" News:
As the core technology of CNC machine tools, the numerical control system of machine tools has always been concerned and concerned by the society and leaders at all levels. I have always believed that the Chinese have the ability to engage in numerical control systems. From the perspective of several industries such as program-controlled switches and DCS, some have developed between people inadvertently. From the point of view of China's system, we must also follow the path of middle and low-end products and gradually penetrate into the medium and high-end products. Some companies have placed great hopes on them, but due to frequent changes in the leadership, the loss of technical backbone, and strategic thinking, the real machine tool market has not been established when the machine tool market is at its peak. In the past, the relatively restricted Huazhong CNC, and Guangzhou CNC, Beijing Kaiqi and other enterprises that have not noticed have developed. They are taking the old road of developing the system, and the old road of the Communist Party to fight the world. The countryside surrounds the city and fights guerrilla warfare. Nowadays, there have been great changes compared with the past. In 1998, about seven or eighty were engaged in systems, and now there have been a number of well-established companies. There are always rushing for the development of domestic CNC systems, and some are unknown to the market. These companies have grown up in the market, not designated by the state, and rely on their own strength to grow. So I can believe that there are some good seedlings. I believe that relying on the development of these enterprises, China's machine tool numerical control system is certainly promising. Recently, the State Council adopted a number of opinions on revitalizing the equipment manufacturing industry and established 16 areas for the key development of China's equipment manufacturing industry, including CNC machine tools, machine tool numerical control systems and key functional components. In order to support the development of these 16 areas, the state has formulated a series of measures for major equipment, including important user areas (not necessarily CNC machine tool users), national important engineering domestic equipment demonstration, the first domestically produced The first set of equipment was set up to support demonstration projects, technology development and technological transformation, and a series of measures were taken to revitalize China's equipment manufacturing industry and localization of equipment in major areas. China's machine tool industry is accelerating in a good situation, and the CNC system will certainly achieve great results. It is very likely that we will dominate the world in the future.
My evaluation is that the characteristics that CNC has now formed are: low-end products are already competitive, mid-range is crowded in, and high-end is involved. Three points of view: First, the CNC industry is facing a growth mode of cooperation. Nowadays, some enterprises have formed a cooperation situation. For example, Guangdu has cooperated well with Kai Endi, Cage and Shenyang Automation, Dalian and Huazhong. The cooperation methods are different and have their own characteristics. Faced with the strong competitors of FANUC and Siemens, we will cooperate more broadly. Everyone thinks that the FANUC and Siemens markets are big and can't compete, but at the same time there are so many companies in the country that are doing it and are alive. This shows that each has its own characteristics. If you can communicate, everyone's level can be improved. Therefore, I hope that everyone can strengthen cooperation. I especially want to ask the old experts here. You are very familiar with the industry. From an objective point of view, you can see which ones are more promising, support the most promising seedlings from all aspects, and carry out propaganda. You have contact with the OEM, deal with the industry, and deal with the leadership. You have a weight in your speech, which can attract the above attention. At the same time, you can make suggestions for the company. Sometimes, the expert can clear the way for the enterprise. Second, the development of the domestic CNC system industry is the common interests of the entire CNC machine tool, so the OEM should do more support. Of course, the main engine factory has certain difficulties. Some CNC systems are user-designated, but the main engine factory has a guiding orientation to the user for the CNC system, and is market-oriented. It can promote more for the domestic CNC system. If there is a problem with the domestic production, it is necessary to point out the specifics, which is a supportive attitude to improve the domestic CNC system. Don't say that domestically can't do it. It's not fat to say that domestic CNC is not available from the OEM. It is impossible for users to use. Give China's CNC system a way out. Third, we have to do more work. Now several opinions have listed the numerical control system as the key support of the state. In order to implement the decision of the State Council, we hope that the machine tool association will mention more specific plans and specific measures for the development of the numerical control system. We will match the bridge and try to make policy measures that are beneficial to our industry. Get more people's acceptance.
This article is the recording of the "China Machine Tool" report. If you want to reprint, please contact the Information and Media Department of China Machine Tool Industry Association.
As the core technology of CNC machine tools, the numerical control system of machine tools has always been concerned and concerned by the society and leaders at all levels. I have always believed that the Chinese have the ability to engage in numerical control systems. From the perspective of several industries such as program-controlled switches and DCS, some have developed between people inadvertently. From the point of view of China's system, we must also follow the path of middle and low-end products and gradually penetrate into the medium and high-end products. Some companies have placed great hopes on them, but due to frequent changes in the leadership, the loss of technical backbone, and strategic thinking, the real machine tool market has not been established when the machine tool market is at its peak. In the past, the relatively restricted Huazhong CNC, and Guangzhou CNC, Beijing Kaiqi and other enterprises that have not noticed have developed. They are taking the old road of developing the system, and the old road of the Communist Party to fight the world. The countryside surrounds the city and fights guerrilla warfare. Nowadays, there have been great changes compared with the past. In 1998, about seven or eighty were engaged in systems, and now there have been a number of well-established companies. There are always rushing for the development of domestic CNC systems, and some are unknown to the market. These companies have grown up in the market, not designated by the state, and rely on their own strength to grow. So I can believe that there are some good seedlings. I believe that relying on the development of these enterprises, China's machine tool numerical control system is certainly promising. Recently, the State Council adopted a number of opinions on revitalizing the equipment manufacturing industry and established 16 areas for the key development of China's equipment manufacturing industry, including CNC machine tools, machine tool numerical control systems and key functional components. In order to support the development of these 16 areas, the state has formulated a series of measures for major equipment, including important user areas (not necessarily CNC machine tool users), national important engineering domestic equipment demonstration, the first domestically produced The first set of equipment was set up to support demonstration projects, technology development and technological transformation, and a series of measures were taken to revitalize China's equipment manufacturing industry and localization of equipment in major areas. China's machine tool industry is accelerating in a good situation, and the CNC system will certainly achieve great results. It is very likely that we will dominate the world in the future.
My evaluation is that the characteristics that CNC has now formed are: low-end products are already competitive, mid-range is crowded in, and high-end is involved. Three points of view: First, the CNC industry is facing a growth mode of cooperation. Nowadays, some enterprises have formed a cooperation situation. For example, Guangdu has cooperated well with Kai Endi, Cage and Shenyang Automation, Dalian and Huazhong. The cooperation methods are different and have their own characteristics. Faced with the strong competitors of FANUC and Siemens, we will cooperate more broadly. Everyone thinks that the FANUC and Siemens markets are big and can't compete, but at the same time there are so many companies in the country that are doing it and are alive. This shows that each has its own characteristics. If you can communicate, everyone's level can be improved. Therefore, I hope that everyone can strengthen cooperation. I especially want to ask the old experts here. You are very familiar with the industry. From an objective point of view, you can see which ones are more promising, support the most promising seedlings from all aspects, and carry out propaganda. You have contact with the OEM, deal with the industry, and deal with the leadership. You have a weight in your speech, which can attract the above attention. At the same time, you can make suggestions for the company. Sometimes, the expert can clear the way for the enterprise. Second, the development of the domestic CNC system industry is the common interests of the entire CNC machine tool, so the OEM should do more support. Of course, the main engine factory has certain difficulties. Some CNC systems are user-designated, but the main engine factory has a guiding orientation to the user for the CNC system, and is market-oriented. It can promote more for the domestic CNC system. If there is a problem with the domestic production, it is necessary to point out the specifics, which is a supportive attitude to improve the domestic CNC system. Don't say that domestically can't do it. It's not fat to say that domestic CNC is not available from the OEM. It is impossible for users to use. Give China's CNC system a way out. Third, we have to do more work. Now several opinions have listed the numerical control system as the key support of the state. In order to implement the decision of the State Council, we hope that the machine tool association will mention more specific plans and specific measures for the development of the numerical control system. We will match the bridge and try to make policy measures that are beneficial to our industry. Get more people's acceptance.
This article is the recording of the "China Machine Tool" report. If you want to reprint, please contact the Information and Media Department of China Machine Tool Industry Association.
Led Par Light,Washer Par Light,Led Mini Party Light,Led Flat Par Can Light
EV LIGHT Guangzhou Co., Ltd , https://www.evlightpro.com