Door and window hardware accessories are generally damaged as: hardware accessories are not fixed, loose off, pulleys, sliding hinges and other damage, opening and closing is not flexible.
Causes of hardware damage:
Improper selection of hardware accessories, poor quality; metal liners are not provided when tightening, and there is not enough installation strength.
Measures to prevent damage to hardware:
1. The type, specification and performance of the selected hardware accessories shall comply with the current national standards and relevant regulations and be matched with the selected plastic doors and windows.
2. For sliding windows with a width of more than 1m, or doors and windows with double glass, double pulleys or rolling pulleys should be used.
3, sliding hinges shall not use aluminum alloy materials, stainless steel materials should be used.
4. When installing hardware with fastening screws, metal liners must be installed. The thickness of the liner should be at least twice that of the fasteners. Do not fasten on plastic profiles or use non-metallic linings.
5, hardware accessories should be the final installation, doors and windows locks, handles, etc. should be assembled after the window door frame into the box, to ensure the correct position, the switch is flexible.
6, after the installation of hardware to pay attention to maintenance, to prevent rust corrosion. In daily use, you must lightly open and close the door to prevent it from being hard-opened and hard-closed, resulting in damage.
Causes of hardware damage:
Improper selection of hardware accessories, poor quality; metal liners are not provided when tightening, and there is not enough installation strength.
Measures to prevent damage to hardware:
1. The type, specification and performance of the selected hardware accessories shall comply with the current national standards and relevant regulations and be matched with the selected plastic doors and windows.
2. For sliding windows with a width of more than 1m, or doors and windows with double glass, double pulleys or rolling pulleys should be used.
3, sliding hinges shall not use aluminum alloy materials, stainless steel materials should be used.
4. When installing hardware with fastening screws, metal liners must be installed. The thickness of the liner should be at least twice that of the fasteners. Do not fasten on plastic profiles or use non-metallic linings.
5, hardware accessories should be the final installation, doors and windows locks, handles, etc. should be assembled after the window door frame into the box, to ensure the correct position, the switch is flexible.
6, after the installation of hardware to pay attention to maintenance, to prevent rust corrosion. In daily use, you must lightly open and close the door to prevent it from being hard-opened and hard-closed, resulting in damage.
Hardware Door & Window Window Switch Stainless Steel Aluminum Alloy Glass Door
Stainless Steel Screws are available in both 18-8 and 316 stainless steel. Please check out the categories listed below for additional information and sizes.
Sheet Metal Screws and Machine Screws are available in several alloys. These alloys include 18-8 Stainless Steel, 304 Stainless Steel and 316 Stainless Steel. Not all sizes and diameters are available in a specific alloy. Contact our sales department if you don't see the size your looking for.
Stainless Steel Screw,Stainless Steel Eye Screws,Stainless Steel Lag Screws,Stainless Lag Bolts
Taizhou TS HARDWARE Co., Ltd , https://www.shuwengroup.com