The main function of the stone curing agent is to make the stone have the functions of waterproof, anti-fouling, acid and alkali resistance, freeze-thaw resistance, anti-bio-erosion, etc., thereby prolonging the service life of the stone and improving the decorative effect of the stone. In summary, the purpose of using stone protectants is to waterproof, stain and protect the stone.
Stone curing agents are also classified into different types depending on the purpose of conservation. For example, there are sealed stone curing agents, breathable stone curing agents, solvent-based organic fluorine protective agents and the like. The roles and principles of these several stone protectants vary.
The sealed stone curing agent forms a protective film on the surface of the stone, so that water, oil, dust, etc. cannot enter the interior of the stone. Usually, the protective agent is prepared by emulsifying an organic solvent liquid or a polymer resin material. Sealed stone curing agent has good anti-fouling performance, can withstand a certain water pressure, and has good curing effect. However, the sealing type stone curing agent has poor gas permeability, which is not conducive to the evaporation of water inside the stone, and the persistence is not very long.
The permeable stone curing agent forms a protective film of a network structure around the capillary pores of the stone surface layer to function. The advantages of the breathable stone curing agent are many, and in the case of reducing the occurrence of lesions in the stone, the lesion inside the stone is not caused at the same time.
The biggest advantage of solvent-based stone curing agents is that the oil-proof performance is very strong. When using such curing agents, pay attention to the degree of dryness of the stone surface, otherwise impermeability will occur, which is not conducive to the absorption of solvents inside the stone. Combined with the use of water-repellent pollution curing agents, the anti-oil performance of stone will be maximized.
Polishing wheels are widly sued on steels ,titanium, copper, brass, aluminum, and also all types of non-ferrous materials, such as gems, stones, glass, plastic, acrylic, ceramics, carbon fiber. Polishing wheels can be all types Grinding Wheels which have more fine grits to achieve the aim of low value of Ra.
Polishing wheels can be diamond grinding wheels, or conventional abrasive grinding wheels, like PVA grinding wheels, silicon carbide grinding wheels, polishing wheels, rubber grinding wheels. Polishing wheels can also be made to polishing Mounted Point with shanks.
Kemei produce and aim on different types of grinding tools, such as aluminum oxide grinding wheel, silicon carbide grinding wheels, mounted points, Diamond Grinding Wheels, CBN Grinding Wheels and wheel dressers.
If you need any type of grinding tool or professional advice about grinding on your workpieces. Don`t hesitate to contact us!
Polishing Wheels,Rubber Polishing Wheel,Mirror Polishing Wheel,Buffing Wheel Dressing Tool
Henan Jinlun Superhard Material Co., Ltd , https://www.jinlungrindingtools.com