Structure】 ã€KCB gear pump structure features: This series of gear pump gear, shaft, pump, safety valve, shaft seal (special requirements, optional magnetic drive, zero leakage structure) formed. The gears are heat-treated to a higher hardness and strength and mounted with the shaft in a replaceable hub. The lubrication of all parts in the pump is automatically achieved using the output medium while the pump is in operation. KCB gear pump Features Performance and application range Pump has a well-designed drain and return tank, the gear in the work to bear the smallest torque, so the bearing load, wear small, high pump efficiency. Pump with safety valve as overload protection, safety valve full back pressure of the pump rated exclusion pressure of 1.5 times, but also allows the discharge pressure within the scope of the actual need to be adjusted. But note that the safety valve can not be used for long-term work of the valve, if necessary, can be installed separately in the pipeline. From the spindle extension to the pump to see, clockwise rotation. Performance Range: Suitable for conveying lubricating oil without solid particles and fibers, non-corrosive, temperature not higher than 80 ℃ and viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt) or similar in nature Other liquids for lubricating oil. Uses: KCB series gear pump for conveying solid particles and fibers do not contain, non-corrosive, the temperature is not higher than 80 ℃, the viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt) of lubricating oil Or other liquids of a similar nature as lubricating oils. Applications: In the oil transfer system can be used as transmission, booster pump; In the fuel system can be used as delivery, pressurization, injection fuel pump; In the hydraulic transmission system can be used to provide hydraulic power of the hydraulic pump; In All industrial areas, can be used for lubricating oil pump; Structural features: This series of gear pumps mainly gear, shaft, pump, safety valve, shaft seal composed of the end. The gears are heat-treated to a higher hardness and strength and mounted with the shaft in a replaceable hub. The lubrication of all parts in the pump is automatically achieved using the output medium while the pump is in operation. The pump has a well-designed drain and return tank, the gear torque in the work to bear the smallest, so the bearing load, wear a small, high pump efficiency. Pump with safety valve as overload protection, safety valve full back pressure of the pump rated exclusion pressure of 1.5 times, but also allows the discharge pressure within the scope of the actual need to be adjusted. But note that the safety valve can not be used for long-term work of the valve, if necessary, can be installed separately in the pipeline. From the spindle extension to the pump to see, clockwise rotation. (Editor: Xiaoxia QQ:) Recommended reading: 2017 exhibition information
Grow lights are artificial light sources that mimic the sun's spectrum and intensity to provide necessary illumination for optimal plant growth. They are designed to produce the right amount of light at the right wavelengths to ensure healthy and vibrant plant growth. All of our full spectrum grow lights have those functions, with sunlike full spectrum, and dimmer to adjust light intensity. Grow lights can also be used to enhance colors, boost plant immunity, and increase crop yields. Ours are mainly led grow lights for cannabis.
Full Spectrum Grow Light,Led Grow Light For Cannabis,Gavita Lights,Grower Choice Led
GuangDong One World High-tech Co., Ltd. , https://www.maksdep.com