[China Aluminum Network] First of all, the need to pay attention to is that when cleaning can not be used on the aluminum frame, it can not be used as a support frame, so that damage to the aluminum doors and windows is relatively large.
Aluminum doors and windows can be used soft cloth dipped in water or neutral detergent, general Panyu and washing powder must be prevented from being used, dirt, toilet cleaners and other strong acid and alkali cleaner can not be used, otherwise it will corrode profiles.
If it is found that the seal tops and glass glue fall off, it should be promptly repaired and replaced. Guaranteed aluminum doors and windows sealed and insulation.
Dry the glass and window frame in time after raining.
Often check the joints of the door and window frame, tighten the bolts in time, replace the damaged parts. Positioning pins, wind braces, floor springs and other vulnerable parts of aluminum alloy doors and windows, you should always check, regularly add oil to adhere to clean, sensitive.
Aluminum doors and windows in use, the action should be light, push and pull along the way; found that there is no hard pull hard push hard, should be troubleshooting. Accumulation of dust, deformation is the main reason for the difficulty of sliding aluminum alloy doors and windows, to adhere to the clean door frame, especially the push-pull tank cleaning. Vacuum cleaner can be used to suck the dust in the groove and door seal tops.
Often look at the aluminum door and window frame wall contact, if long-aluminum doors and windows loose, it is easy to make the frame as a whole deformation, so that doors and windows can not be closed and sealed. Therefore, the screw loosening at the joint should be immediately tightened, such as the screw foot loose, use epoxy glue to adjust a small amount of cement sealing.
The
led grow light small,led grow lights for seedlings,led grow light viparspectra
Shenzhen Pvison Technology Co., Ltd. , https://www.pvisunggrowlight.com