1. Check if the bolts on the shot blasting machine and the Motor are loose, whether the wear parts in the shot blasting machine are worn or not, and check whether the inspection doors are closed.
2. Check if there is any air leakage in the dust removal pipe, whether there is dust or broken in the filter bag. Check if there is any debris on the filter screen in the separator. Check whether the electronic control valve gate is closed or not. Check the wear of the shot blasting indoor guard.
3. Check if the limit switch is normal, check if the signal light on the console is normal, and clean the dust on the electrical control box.
Second, monthly maintenance and maintenance.
1. Check that the bolts at the joints of the components are fixed.
2. Check if the rotating part is running normally and lubricate in time .
3. Check the fan duct wear and is fixed.
Third, quarter maintenance and maintenance.
1. Check the integrity of the bearing electrical control box and add lubricant .
2. View the wear of the shot blasting wear plate.
3. Check the tightness of the fixing bolts and flange connections of the motor, sprocket, fan, vibration transmission.
4. Replace the bearing on the main bearing of the shot blasting machine with a new high-speed lubricant.
Fourth, annual maintenance and maintenance.
1. Check all the bearings and add lubricant, check the bag filter , check all the motor bearings, replace or replace the shield in the projectile area, the machine should be regularly repaired.
2. Check the tension high-manganese steel shot blasting chamber guard, and Other wear-resistant rubber fenders hoist inspection, should be promptly relaxed tension
3. Check the vibration of the shot blasting machine and find that the abnormality should stop working immediately, and regularly lubricate all the motors and bearings on the equipment .
4. Regularly replenish new projectiles. When installing the blades of the blasting machine, pay attention to the difference between the quality of a group of eight blades not to exceed 5g, and check the wear of the blades.
Five, security.
Scattered debris should be cleaned in time. When the equipment is in operation, keep away from the equipment to avoid unnecessary damage.
When the equipment is being repaired, cut off the power supply and mark it. The protection device such as chain or transmission belt should be installed after inspection. Every time before starting the machine , safety measures should be taken. If there is an accident during preparation, press the emergency button to stop working. ACCIDENT.
Concerned about surprises
Label: Shot blasting machine maintenance and safety precautions
Previous: How to check the rolling sound of the bearing Next: How to extend the service life of the bearing?
Ningbo Kyson Cool Electronic Technology Co., Ltd. , https://www.kysoncool.com