As a functional area with a large amount of water, renovations should begin with the laying of tiles, ceilings, and equipment selection to fully consider the need for waterproof and moisture protection.
Renovation: 5 waterproof tips for bathroom renovation
1. The bathroom wall tiles or stone should be fully waterproof under the surface layer, use cement mortar to level the floor, apply a good quality waterproof coating, and then spread a layer of 1 to 2 cement mortar as a bonding layer, the floor tiles And other decorative materials were applied to the building, and after being watered, they were tamped with wooden boards to achieve firm and tight joints. The ground surface layer of flowing water should be drained to the ground, and the water should not be poured or accumulated. The 24-hour storage test can be conducted without leakage.
2, the ceiling of the bathroom is recommended to use microporous aluminum gussets to enhance ventilation and prevent condensation, moisture better. If you do plasterboard ceiling, you should first brush waterproof putty, then brush waterproof coating; In addition, the use of PVC ceiling is easy to produce condensation, and the next drop, so be cautious.
3, the installation of the bathroom pipeline should be avoided as much as possible to change the original up and down the tube, must be horizontal and vertical during the renovation, laying a firm, slope meet the requirements. Floor drain design is still based on the above drainage pipeline, the surface should be slightly lower than the ground, it is recommended to buy good quality deodorant floor drain.
4, bathroom sanitary appliances should be installed in the correct location, along the level of the appliance. Bathroom appliances should be branded and have better waterproof performance. For example, shower warm lamps or bath heaters that are used under long-term humid conditions should be made of stainless steel. The anti-corrosion performance is better, and they have waterproof power switches, cables, and plugs.
5, the bathroom should be a reasonable avoidance of the use of wood materials, do need to use, fire board should be selected or do a full mix of oil decoration, can be waterproof. In the ceiling or other package decoration, the hidden hidden keel needs to be painted with a waterproof coating or antiseptic.
As long as we pay attention to bathroom dampproof work and do well in the above aspects, we will be able to enjoy comfortable and natural pleasure in a completely reassuring bathroom.
Entrance decoration children's room decoration bathroom paint home decoration cement bathroom ceiling material bathroom waterproof bathroom ceiling bathroom floor tile bathroom design decoration home
Optic Crystal End Fittings for Fiber Optic Curtain come in many shapes and sizes, from cylinder to glass balls. Crystal Fiber Optic End Fixture, mainly for the fiber optic chandelier and curtain, are fitted on the naked and clear PVC sheathed Strands of End Lit Fiber.
Fiber optic crystal fittings may or may not be necessary depending on your application. But crystal end light fittings are ideal for chandeliers and special projects are ideal for museum lighting, cabinets, staircases and illuminating walls, among others.
Optic Crystal End Fittings,Fiber Optic End Fixtures,Fiber Optic End Fittings,Fibre Optic End Fittings
Jiangxi Daishing POF Co.,Ltd , https://www.jxopticfibrelight.com