Compared with the advantages of the stainless steel mesh belt winding method, the stainless steel mesh belt winding method is divided into artificial winding method and semi-active active winding method.
(1) Artificial winding method: The artificial winding method with a wire diameter of more than 5mm is used. If the chosen method of artificial winding wound stainless steel mesh belt, usually because the ability to respond to a large carbon steel, may cause mechanical winding count is not accurate, to manual intervention is usually performed after the winding process to short length, stainless steel Mesh belts are hammered outwards to eliminate internal stress during winding.
(2) Semi-active active winding method: Stainless steel mesh belts with a wire diameter of less than 4mm are semi-actively wound. The stainless steel mesh belt wound by the semi-active winding method has high accuracy, low material consumption, and short aging, and does not require manual operation at all, and can greatly improve production efficiency.
Galvanized wire is divided into hot dipped galvanized wire and cold galvanized wire (Electro Galvanized Wire). Galvanized wire has good toughness and flexibility, the maximum amount of zinc can reach 350 g /sqm. With zinc coating thickness, corrosion resistance and other characteristics.
Galvanized Wire,Steel Iron Wire,Galvanised Mesh,Electro Galvanized Welded
Shenzhou City Hongda Hardware Products Co.,Ltd , https://www.galvanziedwire.com