The induction swing gate is a kind of swing gate. Unlike the traditional swing gate, the induction swing gate has an electrically controlled swing gate. It is a high-tech product that focuses on intelligent management of personnel channels. The device integrates mechanical, electronic, microprocessor control and various identification technologies organically, through the selection of various identification systems and the use of reliable safety protection devices, alarm devices, direction indication, and extended friendly The LED count display interface coordinates the intelligent control and management of the channel.
1. Prepare one swinging brake wiring diagram before commissioning and one set of swing gate equipment.
2. Check the wiring Check the wiring of the motor and the mains connection according to the wiring diagram. Check the power wiring and other wiring of the entire device correctly. After confirming it is correct, it can be debugged on power-up!
The protective ground of the equipment must be reliably grounded, otherwise debugging is not allowed;
3, function debugging 1) This gate is a two-way normally closed swing gate. External incoming card swipe signal, outgoing swipe signal.
2) When there is no swiping signal, the pedestrian will alarm when entering from the entrance. Similarly, when there is no swiping signal, the pedestrian will alarm when entering the entrance.
3) Pedestrian brushing cartoon line: When the pedestrian swipes the card, the direction indicator changes to the green arrow, and the gate opens and delays. When the pedestrian passes within the set pass time, the gate closes and the green arrow turns red. If the pedestrian is still out of transit, the gate closes and the green arrow turns red.
4) If a person is too close to the passage of a pedestrian, the time limit is used as a person.
5) The operating speed of the swing switch is adjustable. See parameter settings for details.
4. The power-on swing gate is a normally closed swing gate. After the power is on, the gate is automatically closed and the power is turned off automatically.
1. Prepare one swinging brake wiring diagram before commissioning and one set of swing gate equipment.
2. Check the wiring Check the wiring of the motor and the mains connection according to the wiring diagram. Check the power wiring and other wiring of the entire device correctly. After confirming it is correct, it can be debugged on power-up!
The protective ground of the equipment must be reliably grounded, otherwise debugging is not allowed;
3, function debugging 1) This gate is a two-way normally closed swing gate. External incoming card swipe signal, outgoing swipe signal.
2) When there is no swiping signal, the pedestrian will alarm when entering from the entrance. Similarly, when there is no swiping signal, the pedestrian will alarm when entering the entrance.
3) Pedestrian brushing cartoon line: When the pedestrian swipes the card, the direction indicator changes to the green arrow, and the gate opens and delays. When the pedestrian passes within the set pass time, the gate closes and the green arrow turns red. If the pedestrian is still out of transit, the gate closes and the green arrow turns red.
4) If a person is too close to the passage of a pedestrian, the time limit is used as a person.
5) The operating speed of the swing switch is adjustable. See parameter settings for details.
4. The power-on swing gate is a normally closed swing gate. After the power is on, the gate is automatically closed and the power is turned off automatically.
SUNPLUS MASKING TAPE Professional Automotive High Temperature Resistance. With a high temperature resistant masking tape coated with rubber based and has good stick firmness.
Sunplus Abrasives Co.,Ltd is a leading company in the field of researching and manufacturing premium quality coated abrasives for a wide range of applications.
Founded in 2004, Sunplus has developed into an enterprise with the leading fully - automated Germany system production line and technology to make high
and stable quality sandpaper. All our materials are imported from Europe, Japan and Korea, which assures high quality products from the source.
We constantly invest in research and development so as to ensure that our products will always be a step ahead of competition.
70°C Masking Tapes,Automotive Masking Tape,Auto Paint Masking Tapes,Rubber Based Masking Tape
GUANGZHOU SUNPLUS TECHNOLOGY CO.,LTD , https://www.sunplussandpaper.com