From January to September, the total value of total machine tools produced in Korea was 1987.12 billion won, an increase of 64.77% over the same period of 2009 of 1,059.84 billion won. Among them, in September 2010, the output value of Korean machine tools was 247.613 billion won, an increase of 14.19% from the previous month's 216.844 billion won, and an increase of 51.95% from the 162.596 billion won in September 2009.
In terms of import and export trade, from January to September, South Korea’s cumulative import of machine tools was US$1.01 billion, an increase of 28.34% from US$787 million in the same period last year. Among them, in September 2010, South Korea imported machine tools of $124 million, down 4.26% from last month's $129 million, an increase of 25.06% from September 2009's $98.97 million. From January to September, South Korea exported a total of 1.165 billion US dollars of machine tools, an increase of 36.08% over the 856 million US dollars in the same period last year. Among them, in September 2010, South Korea exported machine tools worth 140 million US dollars, up 6.34% from last year's 132 million US dollars, but down 13.78% from last September's 163 million US dollars; due to the recent slowdown in European and American economic recovery, Korean machine tools Exports have not yet fully recovered, especially in the past two months, the export volume has dropped significantly, and the rate of export recovery is slower than the recovery of domestic demand.
At present, China is Korea's largest machine tool export market, and South Korean machine tool manufacturers intend to develop products suitable for Chinese users' needs, thereby expanding their market share in China. From the following chart, from January 2009 to August 2010, the monthly export volume of Korean metal processing machine tools exported to China can be seen: In July 2009, South Korea’s exports of metalworking machine tools to China gradually fell to the lowest point. After that, the volatility rebounded, and the amount of imports in August all rebounded.
IN WALL MOUNTED BATH MIXER
Concealed faucet is composed of embedded parts + panel + nozzle + handle and other accessories, first of all, the concealed faucet should be pre-laid with the pipeline, the pipeline is laid before do not connect the valve body, to drain first, because there is decoration sand and dust in the pipeline; After draining the water, connect the valve body to test the water and water pressure, and it will be OK if there is no problem. The wall is laid in the back, and then the external parts are connected. In case of damage, the valve core is broken, and it is the same as replacing the valve core with an ordinary faucet.
IN WALL MOUNTED BATH MIXER,Bathroom Faucet Taps,Shower Sink Mixer,Faucet Sink Mixer
WENZHOU CHENKAI SANITARY WARE CO.,LTD , https://www.cnchenkai.com